Trademarks: “ICC,” the International Code Council logo and “Accessible and Usable Buildings and Facilities (ICC/ANSI Al )” are trademarks of the. The edition of ANSI Standard A presented the first criteria for requirements and identify changes from the edition. . ICC/ANSI A ICCANSIAAccessible and Useable Buildings and Facilities-The specifications in this standard make sites, facilities, buildings and elements accessible.
|Published (Last):||24 November 2007|
|PDF File Size:||20.81 Mb|
|ePub File Size:||13.29 Mb|
|Price:||Free* [*Free Regsitration Required]|
Handset cords, if provided, shall be 29 inches mm minimum in length. The visible sig- nal elements shall be 2V 2 inches 64 mm min- imum measured along the vertical centerline Visual and tactile information Tactile information 60 degree typ for equilateral triangle Q Fig. The pile shall be V 2 inch 1 3 mm maximum in height. Describes a site, building, facility, or portion thereof that complies with this standard. Drive up Only automatic teller machines and fare machines shall not be required to comply with Section Where a seat is provided in a standard roll-in type shower, grab bars shall be provided on the back wall and on the wall opposite the seat.
Characters shall contrast with their background with either light characters on a dark background, or dark characters on a light back- ground.
Where an acoustic cou- pler is used, the telephone cord shall be of sufficient length to allow connection of the TTY and the tele- phone handset. Signs at elevator hoistways shall comply with Section Emergency con- trols, including the emergency alarm, shall be grouped at the bottom of the panel.
Door closers and door stops shall be permitted to be 78 inches mm jcc above the floor. Van parking spaces shall be per- mitted to be anso inches mm minimum in width where the adjacent access aisle is 96 inches mm minimum in width.
Nosings that project beyond risers shall have the underside of 203 leading edge curved or bev- eled. Accessible Routes width of the landing shall be at least as wide as the curb ramp, excluding flared sides, leading to the landing.
2003 ICC Accessible and Usable Buildings and Facilities
Accessible urinals shall comply with Section The lead- ing edge of ivc guardrail or barrier shall be 27 inches mm maximum above the floor. A clear floor space com- plying with Section shall be provided. Pictograms shall contrast with their fields, with either a light pictogram on a dark field or a dark pictogram on a light field. Water closets located in ambulatory accessible compartments specified in Section Floors shall be designated Where two adjacent wheelchair spaces are provided, each wheelchair space shall be 33 inches mm mini- mum in width.
The intent of these sections is to allow a person with a physical disability to independently get to, enter, and use a site, facility, building, or ele- ment. Peak clipping shall not exceed 18 dB of clipping relative to the peaks of speech.
Automatic teller machines a117.11 pro- vide the opportunity for the same degree of privacy of input and output available to all individuals. Removable in-tub seats shall be 15 inches mm minimum and 16 inches mm maximum in depth.
Raised thresholds and changes in level at doorways shall comply with Sections and Dwelling units and sleeping units required to have accessible communication features shall comply with Section Turning spaces shall comply with Sec- tion Where a negative number is used to indicate a nega- tive floor, the braille designation shall be a cell with the dots 3 and 6 followed by the ordinal number.
In detention or correction facilities, grab bars are not required to be installed in housing or holding cells or rooms that are specially designed without protrusions for purposes of suicide prevention. Two horizontal grab bars shall be provided on the back wall, 20033 complying with Section Hall signals shall comply with Section The height of water closet seats shall be 17 inches mm minimum and 19 inches mm maximum above the floor, measured to the top of the a11.71.
Walking surfaces with a slope not steeper than 1: The height of the seat shall be 17 inches mm minimum and 19 inches mm maximum above the bathroom floor, measured a1171 the top of the seat. Toe clearance shall be 30 inches mm minimum in width.
Table of Contents | ICC/ANSI A – | ICC premiumACCESS
The telephone handset cord shall be 29 inches mm minimum in length. The requirement for the frequency and range of audible signals iccc not apply in existing elevators. Clear floor space is not required at drive up only automatic teller machines and fare machines.
Access aisles shall be at the same level as the parking spaces they serve.