ZONE AMPLIFIER ZAA ZAA C AUTION AVIS 1 SAFETY INSTRUCTIONS 1 GENERAL USE (용도) 1 I NSTALLATIONS 2 F. Jedia JPAA/JPAA Amplifier Functions · JPAA Operating Instructions. Legislation and Compliance. RoHS Status: Not Applicable. Statement of. מגברי JDM היפרטרוניקס רכיבים וחלקי אלקטרוניקה מערכות כריזה והגברה מוצרי חשמל מגבר מיקסר חכם ל- 5 איזורי כריזה W. ZAA: A/A. ZAA: A/
|Published (Last):||21 December 2016|
|PDF File Size:||19.3 Mb|
|ePub File Size:||13.71 Mb|
|Price:||Free* [*Free Regsitration Required]|
Third, contact terminal to what you want. The stereo signal of the connected sound sources gets internally converted into a manual signal. If clip indicator of output meter is turn-on, please turn GAIN control to the clock-otherwise for the optimum internal operstion.
Do not install this apparatus in a confined jsm such as a book case or similar unit. Users can extend cable at 30m MAX. This apparatus should be serviced by qualified service person. The apparatus shall not be exposed to dripping or splashing and no object filled with liquids, such as vases, shall be place on the apparatus.
When not using microphoneturn microphone “off”. For phantom, please push phantom switch to supply with P. All signal output of remote controller RC will be closed under setting “on” of udm switch on the rear of Xa-1120a. To prevent electric ndm, do jd, open top cover. Turn gain volume and level controls of front panel to the clock-otherwise completely when you use phantom power. Remote controller RC is prior to any other prioroty priority is activated, an signals are closed But, P.
Out put impedance should be ohms more for pre-amp operation. Connect the power cord with safety after check of AC power. Pressing one of the zone button 1 to 5 delegates the signal to the desired loud speaker zone. Secound, you can increase input volume to the position “0” of LED indicator. Cable for audio line should be used by shield cable. It is best suited for call and message transmission installation with alert systems, music in industrial enterprises, offices, congregation halls and sport centers, schools, churches, hospitals, super-maket, and other similar occasions.
JD-MEDIA ZAA ZAA ATT. ZONE AMPLIFIER |
Please pay close attention to the cooling requirements. Do not drop objects or spill liquids into the inside of the apparatus. If not, speaker may get harmful due to loud noise power by power shock.
Check inside temperature of rack system so as not to be more than 40 C for the stable operating in any case, we recommend you to install cooling fan additionally on the rear panel of rack cabinet. You had better use proper input ilevel. This is RJ45 connector for power supply of audio, data, make sure that 4pairs LAN cable is necessary for optimum operation.
ZAA/A/A > Product Information | PA/VA | JD-MEDIA
Busy means under operating of “TALK” or digital message. Install at the place, not bending curved. The following is priority ranking against all signal inputs of system and priority signal is “NO” “OFF” automatically. Announcement only for M6 alertvoice message P. T MIC signal can be activated is spite of priority. This is to prevent is to prevent mistake from remote controller RC Maximum power output per zone speaker.
T MIC remote control.
In case data are supplied to amplifier, send LED indicator lights. This idm for pre signal or alert signal. Use LAN cable within m distance. This makes you replay, stop recorded message of the memory bank M1-M6 one time without setting repeat function. Second, you can increase input volume to the position “0” of LED indicator. The corresponding LED indicator lights.
Then, attenuation function in the main amplifier are reset and zone power-out is converted to HI impedance power output.
מגבר מיקסר חכם ל- 5 איזורי כריזה 240W
Install equipment as follow conditions. It’s a community-based project which helps to repair anything. The battery connection cord has to be 3.
Locate this apparatus away from heat source, such as radiators or other device that produce heat. If all call switch, P.
This function is same as that of “TALK” or “message” operation. Be sure rear of amplifier is securely mounted to rack. All signals can be recorded but recording out can not mdm adjusted by master volume because recording output is in the front of circuit of master volume control. Keep in mind the following when connecting the apparatus. Connect each connection of amplifier perfectly, if not, it maybe Caused hum, damage, electric shock in case of mis-connecting.